NOVOSENSE Microelectronics (hereinafter referred to as NOVOSENSE, Kechuang Board stock code 688052) is a high-performance and high-reliability analog and mixed-signal chip company. Since its establishment in 2013, the company focuses on the three directions of sensor, signal chain and power management, providing a wealth of semiconductor products and solutions, and is widely used in the automotive, industrial, information communication and consumer electronics fields. With the mission of "sensing" and "driving" the future and building a green, intelligent and interconnected "core" world ", NOVOSENSE Micro is committed to providing chip-level solutions for the connection of the digital world and the real world. In 2013, NOVOSENSE Micro Company was established, 10 global locations, 750 employees worldwide. NOVOSENSE micro values: reliable, reliable, continuous learning, adhere to long-term value; NOVOSENSE Micro mission and vision: to "sense" and "drive" the future, to build a green, intelligent, interconnected "core" world. In March 2024, NOVOSENSE Micro announced the launch of the vehicle gauge level CAN SIC (Signal Improvement Capability) NCA1462-Q1 based on its self-developed innovative ringing suppression patent. Compared with the current mainstream CAN FD vehicle communication scheme, NCA1462-Q1 is further compatible with CiA 601-4 standard under the premise of meeting the ISO 11898-2:2016 standard, and can achieve a transmission rate of ≥8Mbps. Thanks to NOVOSENSE's patented ringing suppression function, the NCA1462-Q1 still has good signal quality even in the case of multi-node connections in star networks. In addition, the ultra-high EMC performance and more flexible VIO down to 1.8V help engineers simplify system design and create higher quality on-board communication systems. In the same month, the new car-scale temperature and humidity sensor NSHT30-Q1 is a relative humidity (RH) and temperature sensor based on CMOS-MEMS. The NSHT30-Q1 integrates a complete sensor system on a single chip, including capacitive relative humidity sensor, CMOS temperature sensor and signal processor, and I2C digital communication interface, in the DFN package design with Wettable Flank, and the product size is only 2.5mm x 2.5mm x 0.9mm. The communication mode of its I2C interface, small and reliable package, and wider operating temperature range make the NSHT30-Q1 ideal for automotive environment applications. NOVOSENSE's single-chip integrated temperature and humidity sensor NSHT30-Q1, with high reliability, high precision and low power consumption, is suitable for various on-board applications, such as automotive HVAC control modules and battery management systems, to help vehicles achieve more efficient and stable system performance, and provide strong support for the development of automotive intelligence.

NOVOSENSE micro automotion-grade chips are widely used in body control, powertrain and motor drive systems for traditional and new energy vehicles, helping our customers design safer, more reliable and more comfortable vehicles. The electronic water valve plays a role in regulating the mixed ratio of cold and warm water flow in the thermal management system of new energy vehicles. It is an important part of new energy vehicles. NOVOSENSE 's NSM3012 has the function of resisting external common mode magnetic field, which can effectively resist the strong magnetic field interference of new energy vehicles, and provide an accurate Angle information for the electronic water valve processor. In modern cars, the comfort of the seat has gradually attracted people's attention, mainly reflected in the adjustable waist support function and back support function, as well as the stability of the seat to provide the driver with water. These functions are usually achieved by adjusting different paths and different sizes of airbags inside the seat according to the body shape of the driver and front passenger, and the internal pressure sensor of the air absolute pressure or gauge pressure is a key component of the pneumatic seat application. NOVOSENSE provides these key components. In order to achieve full combustion and reduce emissions, it is usually necessary to install a (temperature) pressure sensor (TMAP) on the engine intake manifold, and to achieve the atmospheric pressure sensor (BAP) on the ECU board. In addition, more and more cars are starting to use liquefied petroleum gas (LPG) and compressed natural gas (CNG). Usually such vehicles will store gas in a pressurized tank, and the pressure sensor detects the intake pressure and temperature to achieve full combustion and reduce emissions. NOVOSENSE also provides these critical components. The vehicle main inverter is responsible for the main motor control system of new energy vehicles, and is a key module in the car, mainly responsible for the driving behavior and driving efficiency of the vehicle. At the same time, the main inverter can also return the regenerative energy of the brake to the battery for charging, and the maximum driving range of the new energy vehicle is closely related to the efficiency of the main inverter. NOVOSENSE provides complete isolation voltage detection, isolation current detection, and isolation communication solutions to help customers achieve safe and reliable vehicle main inverter solutions. PTC heaters are used in new energy vehicles and can provide efficient and safe heating systems. PTC is provided with current and voltage by high-voltage batteries of new energy vehicles, and the heating element is controlled on and off through IGBT or other power devices. MCU controls the PTC system by collecting voltage and current information, and uses transceivers to communicate with other modules. NOVOSENSE Micro provides complete isolated voltage detection, isolated current detection, isolated drive and isolated communication solutions to help customers achieve efficient and reliable PTC system management.

NOVOSENSE chips are widely used in transmitters, motor drives and PLC/DCS systems, and are mass-produced by leading customers in the industry, providing customers with reliable one-stop isolation and sensor application solutions. As the brain of the industrial automation system, the main role of industrial control is to collect various sensors and user instruction input in the industrial field, and distribute the relevant instructions and actions to the executive devices according to the pre-set program, so as to ensure the automatic operation of the system. As the most important execution unit in the industrial automation system, the response speed and the precision of the execution action directly determine the performance of the automation system. In the actual scenario, mainstream products such as industrial frequency conversion and servo drives are widely used in Industry 4.0, industrial robots, CNC machine tools, construction machinery, automated production and equipment. Since most scenarios belong to high-voltage systems and involve human-machine interaction, very high requirements are put forward for the safety performance, reliability and electrical performance of isolation devices. NOVOSENSE Micro provides a full range of isolation chip solutions for this application scenario, providing customers with one-stop services. The volume of gas depends on the temperature. Under the same pressure condition, the higher the temperature, the larger the volume, and the calorific value decreases, so the traditional gas meter is unfavorable to the user. Electronic temperature compensation gas meter is to add electronic temperature compensation device on the gas meter, temperature measurement element real-time temperature compensation, is a common temperature compensation method. Because the precision of temperature will affect the accuracy of measuring gas amount, the digital temperature sensor based on semiconductor principle has the advantage of application accuracy compared with NTC. NOVOSENSE 's NST1001 two-wire temperature sensor, its unique signal access mode, makes it and traditional NTC, only two wires can meet the power supply and communication, and its accuracy is much higher than the temperature measurement method of NTC. In addition, during the period of no measurement, this chip can achieve complete zero power consumption without the need for additional external switches to control its power supply, which is ideal for gas meter applications requiring ultra-low power consumption.

Related information: NOVOSENSE agent, NOVOSENSE distributor, NOVOSENSE quotation system, NOVOSENSE product series, NOVOSENSE hot products, NOVOSENSE technical consultation, NOVOSENSE company introduction

NOVOSENSE Quality Supplier Endorsement:

Chengdu Retronic Technology Co., Ltd. specialize in international comprehensive electronic components supply chain service. The company has passed ISO9001 quality management system certification and Dun & Bradstreet global certification (D-U-N-S # 420990486), and has offices in Chengdu, Hong Kong, Shenzhen, Europe, the United States, Southeast Asia and so on.  Main brands: ADI, TI, ALTERA, XILINX, MICROCHIP, FUJITSU, MITSUBISH, MAXIM, E2V, INTERSIL, ACTEL, QORVO, Mini-Circuits, AVAGO, TE, MOLEX. We are serving more than 860 domestic and foreign customers, involving medical industrial control, intelligent household appliances, 5G communications, instrumentation and new energy industry applications. The company has 20 years of industry experience and global supply chain channels. In order to make it easy for customers to achieve one-stop purchasing, we have always insisted on the following points: ensure genuine products, guarantee product quality, quickly survive and quote, make BOM matching orders quotation, give price concessions for customers to save more costs, have a large number of spot inventory, provide fast delivery to meet customer timeliness requirements. Welcome to inquire and get detailed catalogue and samples.

Email：328628207@qq.com; WhatsApp: +86 15928527272; WeChat:+86 15928527272

NOVOSENSE Popular models recommended:

NSI6601C-DSPR

NSI1311-Q1S

NSI1311-DSW

NSI1306M25-DSWVR

NSI1200-DSWVR

NCA9555|nca9555